Intelligent Input Module：CFT-952

概述

The CFT-952 Intelligent input module (CFT-952 module for short) is used with CFT-MN300,a two-bus fire alarm control panel. It can be connected with a conventional smoke detector, a conventional heat detector, a conventional manual call point, a conventional hooter/horn and some other equipment. After the said equipment starts to operate, the alarm signal output will be sent by the CFT-952 module to the fire alarm control panel through a signal bus to give a fire alarm.

性能特点

Mode of operation: Nonpolar two-wire system

2. Quiescent current: ＜0.5mA (bus); ＜6mA (power line)

3. Action current: ＜2mA (bus); ＜15mA (power line)

4. Operation indicator: The inspection indicator will blink once about every 12 seconds
in the inspection status or remain lit in the operation status.

5. Operating environment: Temperature: －10℃～50℃; relative humidity: ≤95% (40℃±2℃, without condensation)

6. Terminal load: 4.7K resistance

7. External dimensions: 86×86×40(mm)

Previous: Addressable Manual Call Point：CFT-960 Next: Intelligent Input/Output Module：CFT-956 Back