News Industry News Details
Industry NewsNB Intelligent smoke detector features and installation methods
Time: 2020-07-02 View: 2342
When we install the intelligent smoke detector in our life, we should first understand the functional materials, installation methods, and matters needing attention. Only by correctly mastering the method can we better use it and prevent fire, as follows:
I. Function and characteristics of intelligent smoke detector
1. Photoelectric sensing technology can detect visible particles (smitten fire) faster than ionization alarm.
Easy to install and maintain.
3. Fault self-check function.
4. Automatic reset.
5, sound and light alarm, more than 85 db loud alarm signal with red LED flashing.
6. Detector test button can verify the detector alarm function.
7. Detector low power warning, beep every 40 seconds, indicating the need to replace the battery.
8, with anti - demolition design, can be installed in saloon cars, ships and other places with vibration.
9. SIM process manufacturing, strong stability.
10. Dustproof, insect-proof, anti-white light interference design.
11. Anti-rf interference (20V/ M-1ghz)
Low power consumption wide area Internet of Things NB-IOT technology
Ii. Installation of intelligent smoke detector
1. The product shall not be installed in the following places
A). Places with smoke retention under normal conditions.
B). Places with relative humidity greater than 95%.
C). Places polluted by dust, water mist and oil mist.
D). Places with high wind speed (> 5 m/s).
2. Correctly load the battery into the battery bin according to the marked positive and negative polarity.
3. Select the appropriate position and recommend to install it on the ceiling in the center of the detection space. If it is impractical, do not install it in the non-flowing air area (As shown in Figure 1).
I. Function and characteristics of intelligent smoke detector
1. Photoelectric sensing technology can detect visible particles (smitten fire) faster than ionization alarm.
Easy to install and maintain.
3. Fault self-check function.
4. Automatic reset.
5, sound and light alarm, more than 85 db loud alarm signal with red LED flashing.
6. Detector test button can verify the detector alarm function.
7. Detector low power warning, beep every 40 seconds, indicating the need to replace the battery.
8, with anti - demolition design, can be installed in saloon cars, ships and other places with vibration.
9. SIM process manufacturing, strong stability.
10. Dustproof, insect-proof, anti-white light interference design.
11. Anti-rf interference (20V/ M-1ghz)
Low power consumption wide area Internet of Things NB-IOT technology
Ii. Installation of intelligent smoke detector
1. The product shall not be installed in the following places
A). Places with smoke retention under normal conditions.
B). Places with relative humidity greater than 95%.
C). Places polluted by dust, water mist and oil mist.
D). Places with high wind speed (> 5 m/s).
2. Correctly load the battery into the battery bin according to the marked positive and negative polarity.
3. Select the appropriate position and recommend to install it on the ceiling in the center of the detection space. If it is impractical, do not install it in the non-flowing air area (As shown in Figure 1).
