Smoke alarm lamp shining cause.

    Just install smoke alarm to turn off the lights at night we could see the smoke detector in the shiny, we will think whether smoke alarm is broken, don´t worry this is a normal reaction, look not to come out at ordinary times during the day or the light is too strong, easy to focus on the night. The smoke detector flashes, represents the detector in the inspection, and the fire control controller has the "interaction", the smoke detector is the fault, the fire alarm is through this "interaction" completes.
The smoke detector of multi-brand equipment in the market will flash in the work, that is normal, do not need to be nervous, does not represent the fire, or the equipment is broken. But normally on detector red, that´s attention, most likely the fire happens, should be alert at this time, if the acousto-optic alarm or fire broadcast rang, and also it is prompted to escape, to escape to a safe area.
Are all the detectors flashing in their normal work? Actually, this is not certain. Some brands or models of smoke detector, normal working light is not flashing. But the fire red light is always on the same page, and here we remind you that the smoke alarm must be installed to avoid the danger of fire.
Are all the detectors flashing in their normal work? Actually, this is not certain. Some brands or models of smoke detector, normal working light is not flashing. But the fire red light is always on the same page, and here we remind you that the smoke alarm must be installed to avoid the danger of fire.