Networking type smoke alarm daily maintenance and transportation requirements

Networking type smoke alarm and household smoke alarm physical appearance similar, but the difference between them is large, fire alarm working household smoke alarm is suitable for families, small workshops and other smaller places, it does not need to contact with the outside, itself is a small alarm system. Network type smoke detector is more suitable for communication room, fire prevention work in KTV large place, it can be matched to use with the fire fighting facilities. Networking type smoke alarms in the transport to daily use should pay attention to the following points.Transportation and storage networking type smoke detectorTransportation and storage according to the provisions of the GB/T15464-1995 "general technical conditions" instrumentation package.Transportation and storage should keep production factory original packing and seal integrity process, and to ensure that the product is not subject to severe shock.The environment temperature should avoid acuteness change.Container stacking height of not more than 6 layer, devanning after single stack height of not more than 5 layer.Daily maintenance and troubleshooting network type smoke detectorIn the use process, such as the use of fault, please contact the supplier as soon as possible, do not secretly disassembly repair, to avoid accidents. If not used for a long time, remove the detector must be, packing box, stored in ventilated and dry place. If the alarm is no output, then check the jumper settings are correct. If frequent false alarm, alarm optical maze dust may be too big, please hand clean