Fire alarm host fault processing method

    In the use of fire alarm host, can hear the sound of fire fire alarm host machine, this kind of situation is smoke alarm sensor to the fireworks, the alarm signal is sent to the fire alarm host, can hear the sound of the host to fault, possible lines or equipment. Below small make up detail processing methods:

When heard the fire alarm host machine, want to view information from fire host screen, it will have alarm detector number and address. Then according to display the address of the information in a timely manner to check the fire situation.

After arrived at the scene, I can´t see a fire, is the false positives, may be the inside of the detector much dust. When they returned to the control room by pressing "reset" button will restore the initial state to the host. If still false alarm, it will need to clean the probe, can inform the maintenance unit for cleaning.

After arrived at the scene, if really have the fire is going to take action and inform the superior, 119 calls depending on the situation

Hear the host to failure, can press the "sound" key, then the host is no longer rang. At this time to look at the information of display and notify maintenance unit according to the information displayed is processed in a timely manner.

Whether alarm or fault, print out the information on the fire host printing paper to save, and make records there are many operations on fire host key, have a plenty of start of fan, a plenty of to start the fire pump, have a plenty of start the shutter, so don´t want disorderly in unfamiliar circumstances.