The sensitivity of non coding smoke detector how to adjust

Non coding smoke detector can network with the traditional fire alarm, fire alarm and applicable to shopping malls, hotels, shops, warehouses, engine room and other civil and industrial sites. In the actual use of the process, some users because it is very clear about my condition is not, choose non coding smoke high sensitivity or insufficient detector, the false alarm or alarm delay phenomenon often occurs it will. So, someone had an idea: I can adjust the sensitivity of non coding smoke detector?

The answer is not to do not recommend. Because of the sensitivity of non coding smoke detector in the factory has been set up, the general settings for the sensitivity level two. Sensitivity to adjust the detector needs to open it, and then adjust the potentiometer values inside, the user´s own adjustment will grasp the bad, it will affect the detector using. If the sensitivity of the detector must be adjusted, back to the manufacturers recommendations. Furthermore, the non coding the smoke is the most novel detectors are smart chip, can be automatically calculated and compensation to the environmental factors, automatically adjust the sensitivity, which is more adapt to environmental conditions, so the user does not have to adjust.

To avoid this situation, the best is the user detector in the purchase of non coding smoke before, the first of his conditions of use to describe clearly, so that manufacturers put sensitivity settings in a more appropriate value in the pre delivery.